Beauty tools

Silk’n FaceFX Anti-Aging LED Light Device

MMH ID: 172875; Brand: Silk’n FaceFX; Model No: Silk’n FaceFX

Price: $378.00

LIMITED OFFER: Comes with Free 1 oz Silk’n Facial Hydrator Serum ($79 value), which sinks deep into the skin to soften and hydrate it, while also working as a lubricant for the handheld Silk’n FaceFX to enable easier gliding o the FaceFX device on the skin.

Product Description & Benefits

  • Silk’n FaceFX uses a combination of modern technology in Dermal Heat Technology and Deep Fractional Light Technology to provide users with younger looking, rejuvenated skin
  • FDA cleared hand-held light emitting diode (LED) device
  • Results begin to appear in as little as a few hours, with noticeable results appearing within 3-7 weeks
  • The energy used by the Silk’n LED light device improves skin texture and diminishes the appearance of fine lines and wrinkles
  • User-friendly one button design
  • Reduces the size of pores
  • This anti-aging process provides both men and women of all ages with long-term, radiant looking skin
  • Penetrates through the dermis or the top thick layer of skin, the epidermis or the deepest layer of skin to treat fine lines and deep wrinkles
  • Created by some of the most innovative leading cosmetic laser specialists, the Silk’n FaceFX uses thermal heating action to maximize skin rejuvenation results

After 8 weeks of using Silk’n FaceFX:

  • 91% of users noticed an improvement in skin texture
  • 78% of users noticed a reduction in pore size
  • 69% of users noticed a reduction of fine lines and wrinkles
  • 47% of users noticed fading of skin patches

How Silk’n FaceFX Works

The red light energy and dermal heat work together to increase cell turnover to improve skin texture and diminish fine lines and wrinkles. Deep thermal heat stimulates collagen production in the skin, increasing regeneration. Meanwhile, the deep fractional light technology provides phototherapy with high powered LED’s which stimulates fibroblast growth, and thus collagen. This combination leaves users with younger looking rejuvenated skin, smaller pores, fewer fine lines and wrinkles and overall skin improvement. Outstanding results become apparent after just a short series of treatments.

Additional Benefits

FaceFX uses a 645 nm red light emitting diode (LED) therapy treatment to erase the appearance of fine lines and wrinkles, while improving skin texture, color and tone.

  • Can penetrate through the entire thickness of the top layer of skin
  • Red light therapy has been proven in hundreds of clinical papers to provide benefits in skin rejuvenation and wrinkle treatments
  • Red light therapy is now available for at home use
  • Deep uniform heating with active thermal control
  • Heating of the dermis stimulates fibroblasts to produce more collagen regeneration
  • Heating improves blood circulation and metabolism of the treated area
  • Heating of the skin allows the skin greater absorption of post‐treatment moisturizers

Instructions for Use

  • Typical Treatment Areas: The FaceFX is most commonly used around the eyes, under the eyes, cheeks, the forehead, around the mouth and neck.
  • Treatment Schedule: Each area should be treated for around 5-7 minutes. Apply light pressure while slowly moving the FaceFX applicator in small circular motions. For the first month of using FaceFX, you should repeat the process around 3 times a week. Following the first month, to maintain your results, you only need to use FaceFX once a week. Results become noticeable in 3-7 weeks.

Safety Features

  • Built‐in safeguards in the Silk’n FaceFX assure high safety levels
  • Built-in smart sensor so energy will only be emitted when the applicator is in contact with the skin
  • Regulation of skin temperature, so surface temperature of the skin does not exceed 41 degrees Celsius
  • FaceFX will automatically turn off, and turn back, on when the skin’s surface is below 41 degrees Celsius

Frequently Asked Questions

What is home fractional technology?

Home Fractional Technology is a safe and effective method of providing heat to multiple layers of skin for total skin solution. By fractioning the energy, FaceFX penetrates deeper into the skin without any higher levels of discomfort. This allows the technology to penetrate the deepest wrinkles and discolored spots, leaving your skin renewed and free of irregularities.

How does Silk’n FaceFX work?

The diode light stimulates deep into the skin tissue to eradicate irregularities and leave your skin looking young, fresh and renewed. A typical treatment session should last between 15 and 20 minutes.

What areas can be treated?

The majority of the face can be treated with the FaceFX Anti-Aging Device. The FaceFX is most commonly used to treat areas around the eyes, under the eyes, cheeks, the forehead, around the mouth and the neck. When treating around the eyes, it is recommended to be cautious and keep your eyes closed to avoid overheating or injury.

Are there any negative side effects?

The Silk’n FaceFX is a safe and effective device. The most commonly reported side effect is slight warmth on the skin over the treated area. The majority of users can expect a slight redness in the treated area that will diminish within a few minutes. In some cases, redness may linger for a few hours, but disappear soon after. There are no serious side effects to the treatment.

Can I wear make up immediately after treatment?

Yes.

Why do I need to use moisturizing cream?

The heat applied during the Silk’n FaceFX treatment can often leave your skin dry. It is advised that you apply a small amount of moisturizing cream on the treated area following the treatment to restore hydration and soothe the area.

I have dry skin and it tugs my skin when I use it. What should I do?

For those with dry skin, gliding the device may prove more challenging for those without. This ‘tugging’ feeling can be alleviated by using either a serum or moisturizer.

When using the Silk’n FaceFX, those with dry skin should wash their face as instructed and apply a small amount of serum on the skin. Not only will this help you glide the device easier, but also enhance the healthy glow of your skin afterwards! Serums can be easily purchased wherever you buy your normal moisturizer.

Moisturizer can also lessen the ‘tugging’ feeling you may experience. However, some moisturizers may absorb too quickly and thus be ineffective. It is recommended that you apply your normal moisturizer following the treatment to renew a refreshed, hydrated feeling. Remember to remove any residue from your device with a soft, clean cloth.

I sometimes don’t see light during my treatment, is there a problem with my device?

On occasion, dry skin can cause the device to lose contact with skin. The simplest solution to this problem is the application of a serum, alleviating any inconsistencies with skin contact. It is recommended that you wash your face per instructions and apply a small amount of serum on the skin before using the Silk’n FaceFX.

I recharged my device but why isn’t there power in my FaceFX?

The FaceFX generally requires a 6-8 hours charge for full power. Thus, it is recommended charging your device either overnight or perhaps during the work day so you are ready for your next treatment. The power adapter connected to the device must be inserted correctly. If this does not resolve this issue please call our customer service department at 1-866-363-4325 for further assistance.

Can my FaceFX be used abroad?

The FaceFX can be used universally, as long as you have the appropriate plug adaptor.